Course Overview

    Overview

    Course Highlights

    Eligibility Criteria

    Benefits

    Exam Format

    7 QC Tools Training in Indonesia ExplainedUntitledSeven Tools, One Quality Toolkit

    The 7 QC Tools Training (Seven Quality Control Tools Training) is a practical, one-day skills course that teaches the seven core quality control tools professionals use to identify, analyse and solve quality problems at work. Established by Kaoru Ishikawa, these seven tools sit at the heart of quality management systems such as ISO 9001, Six Sigma and Lean, and remain the everyday problem-solving toolkit on the factory floor and in the office. Across Indonesia, manufacturers in automotive, electronics, food and beverage, pharmaceuticals and FMCG rely on these tools to reduce defects, control processes and drive continuous improvement. The training suits quality engineers, production supervisors, process improvement practitioners and anyone building quality problem-solving capability, with no prior statistics background required. You learn each tool through worked examples and hands-on exercises, so you can apply the fishbone diagram, Pareto chart, control chart and the rest immediately after the session. Start building practical quality skills with Invensis Learning.

    7 QC Tools Training in Indonesia ExplainedSeven Tools, One Quality Toolkit

    The 7 QC Tools Training (Seven Quality Control Tools Training) is a practical, one-day skills course that teaches the seven core quality control tools professionals use to identify, analyse and solve quality problems at work. Established by Kaoru Ishikawa, these seven tools sit at the heart of quality management systems such as ISO 9001, Six Sigma and Lean, and remain the everyday problem-solving toolkit on the factory floor and in the office.

    Across Indonesia, manufacturers in automotive, electronics, food and beverage, pharmaceuticals and FMCG rely on these tools to reduce defects, control processes and drive continuous improvement. The training suits quality engineers, production supervisors, process improvement practitioners and anyone building quality problem-solving capability, with no prior statistics background required.

    You learn each tool through worked examples and hands-on exercises, so you can apply the fishbone diagram, Pareto chart, control chart and the rest immediately after the session. Start building practical quality skills with Invensis Learning.

    Certification Badge

    Key Highlightsof the 7 QC Tools Training Training Course

    End-to-End Skill Development

    • Structured 7 QC Tools training in the Indonesia designed to help learners understand the core concepts, tools, methods, and practices covered in the program through instructor-led 7 QC Tools training
    • Course content aligned with current industry expectations, workplace requirements, and practical learning objectives for quality management professionals in the Indonesia seeking a 7 QC Tools course online
    • Real-world examples and scenario-based learning delivered through 7 QC Tools training online to help learners connect quality control concepts with everyday professional situations across manufacturing, healthcare, IT, and services
    • Guided learning support to help participants strengthen understanding, improve confidence, and apply the 7 QC Tools effectively at work through a structured 7 QC Tools training program

    Structured Courseware and Learning Resources

    • Access to organized 7 QC Tools course materials including Pareto chart templates, fishbone diagram worksheets, control chart reference cards, and scatter diagram plotting guides designed to support step-by-step learning
    • Topic-wise learning resources, exercises, and knowledge checks to reinforce understanding of data collection, analysis, and defect identification techniques
    • Practice activities, assignments, quizzes, or workplace-based exercises included where applicable as part of a 7 QC Tools bootcamp
    • Supplementary learning aids such as check sheet designs, histogram construction guides, flowchart design tools, and QC data analysis worksheets supported through 7 QC Tools coaching

    Instructor-Led, Practical Learning Experience

    • Live interactive sessions delivered by experienced quality management practitioners with relevant domain expertise across manufacturing, process improvement, and quality assurance
    • Real-world examples, case discussions, and applied quality analysis activities to improve practical understanding of each of the seven tools
    • Opportunities to ask questions, clarify doubts, and participate in trainer-led discussions on defect analysis, root cause identification, and process stability assessment
    • Training approach focused on helping learners use the 7 QC Tools at work, not just complete the course content

    Flexible Learning Support in Indonesia

    • Flexible training formats available for individual learners and corporate teams in the Indonesia
    • Options may include live virtual classroom training, onsite training, self-paced learning, or customized group training depending on availability
    • Learning support designed to help participants stay on track before, during, and after the 7 QC Tools training
    • Additional revision, refresher, or post-training support may be available based on the selected course

    Learn the Core Concepts Covered in the Course

    • Understand foundational quality control principles and how the seven tools work together to support continuous improvement and defect reduction
    • Learn Pareto analysis, fishbone diagramming, control chart interpretation, and scatter diagram plotting based on the course curriculum
    • Explore practical use cases showing how the 7 QC Tools are applied across manufacturing, healthcare, IT, and service delivery environments
    • Build role-relevant knowledge of data collection methods, process flow analysis, and statistical quality techniques that support better decision-making and workplace performance

    Practice, Assessment, and Completion Support

    • Practice constructing Pareto charts, control charts, histograms, and scatter diagrams through quizzes, exercises, and scenario-based activities where applicable
    • Use assessments to identify knowledge gaps in quality control concepts and strengthen understanding of weaker areas
    • Receive guidance from instructors or learning support teams to improve understanding of tool application and stay aligned with course objectives
    • Earn a course completion certificate after successfully meeting the training requirements

    Career and Workplace Application

    • Build practical quality management skills that can support career growth, role advancement, or improved job performance in the Indonesia
    • Strengthen confidence in applying Pareto analysis, fishbone diagrams, control charts, and other quality tools to real-world process improvement challenges
    • Improve professional credibility through structured, skill-focused 7 QC Tools training recognized across Indonesia industries
    • Support organizational capability building when delivered as corporate or team training across quality, manufacturing, operations, and healthcare sectors

    7 QC Tools Training Eligibility in the IndonesiaWho Can Enroll?

    • No prior quality control experience is required to enroll; the 7 QC Tools training is open to all working professionals in the Indonesia

    • Basic familiarity with workplace processes or quality concepts is helpful but not mandatory for enrollment

    • Professionals from manufacturing, healthcare, IT, and service sectors will find the course immediately applicable to their roles

    • Quality control professionals, supervisors, process improvement specialists, and Lean Six Sigma practitioners are well suited for this training

    • Anyone seeking to strengthen data analysis, defect identification, and process improvement skills in the Indonesia will benefit from this program

    Why Learn the Seven QC ToolsSkills You Can Apply Tomorrow

    For Individuals

    For Individuals

    The seven QC tools give you a complete, practical toolkit for everyday quality work. You learn when to use each tool and how the tools connect in a single investigation, from collecting data on a check sheet to ranking problems with a Pareto chart and drilling into root causes with a fishbone diagram. Whether you work in manufacturing, services, healthcare or IT quality, these are the tools employers expect quality and process improvement people to use with confidence.

    If you want to move from firefighting to structured problem-solving, this training is a direct, hands-on step. You leave able to apply all seven tools to real defects, processes and improvement projects in your own workplace.

    • Diagnose the real root cause of defects using the fishbone (Ishikawa) diagram
    • Prioritise the vital few problems that drive most defects with Pareto analysis
    • Read process behaviour over time and spot special-cause variation with control charts
    • Collect reliable quality data at source using well-designed check sheets
    • Test whether a suspected cause truly drives an outcome using scatter diagrams
    • Reveal hidden patterns by stratifying data across shifts, machines and lines
    • Speak a shared quality problem-solving language with production and engineering peers
    • Build a strong foundation for Six Sigma, Lean and ISO 9001 work
    For Organizations

    For Organizations

    Group training equips your quality, production and engineering teams with a common, practical approach to solving quality problems. Teams learn to collect data, rank issues, find root causes and control processes using the same seven tools, so improvement work becomes consistent and repeatable. For manufacturers scaling output or tightening export standards, this training turns raw shop-floor data into decisions that cut defects and waste.

    If your plants struggle with recurring defects and inconsistent problem-solving, team training in the seven QC tools creates a shared quality language across lines and sites. It is a scalable, flexible way to build lasting in-house capability.

    • Give cross-functional teams one shared quality problem-solving toolkit
    • Reduce defects, rework and waste through structured root cause analysis
    • Strengthen process control and data-driven decisions on the shop floor
    • Support ISO 9001, IATF 16949 and Six Sigma improvement initiatives
    • Build in-house capability so teams solve problems without outside help
    • Standardise quality practice across plants, shifts and business units
    • Deliver training onsite or live virtual to fit production schedules

    7 QC Tools Career Growth in IndonesiaQuality Skills Employers Want

    The seven quality control tools are core skills for quality and process improvement roles across Indonesia's fast-growing manufacturing base. From QC Inspector and Quality Engineer to QC Supervisor, Continuous Improvement Specialist and Quality Assurance Manager, employers in automotive, electronics, food and pharmaceuticals want people who can apply these tools to cut defects and control processes. With hundreds of new factories planned in 2026, demand for hands-on quality talent keeps rising, which makes practical 7 QC Tools training a smart step for anyone building a quality career.

    Rp457M

    Quality Assurance Manager pay, Indonesia

    avg per year, SalaryExpert 2026

    20.2M

    Manufacturing workforce, Indonesia

    workers, Ministry/BPS 2025

    219,000+

    New manufacturing jobs, Q1 2026

    planned, Ministry of Industry

    18.56%

    Manufacturing GDP target 2026

    Ministry of Industry

    SECTORS HIRING

    • —Automotive and Auto Components
    • —Electronics and Electrical Equipment
    • —Food and Beverage / FMCG
    • —Pharmaceuticals and Healthcare
    • —Textiles and Apparel
    • —Chemicals and Downstream Processing

    GROWTH TRENDS

    • —633 new factory plans filed in Q1 2026 (Ministry of Industry)
    • —EV and battery investment expanding automotive quality roles
    • —Manufacturing targeted at 5.51% growth and 18.56% of GDP
    • —Rising ISO 9001 and IATF 16949 compliance demand
    • —Industry 4.0 and SPC adoption on the factory floor
    • —Vocational upskilling closing the quality-skills gap

    Sources: Ministry of Industry, BPS, The Jakarta Post, Statista; SalaryExpert, Glassdoor, PayScale, JobStreet (Indonesia) 2026.

    Quality Challenges Driving Demand for the Seven Tools in Indonesia

    Rising Defect and Rework Costs

    As Indonesian manufacturers scale output, unmanaged defects and rework eat into margins. Structured root cause analysis with the seven tools helps teams remove the causes, not just the symptoms.

    Learn structured root cause analysis

    ISO 9001 and IATF 16949 Pressure

    Automotive and export supply chains demand documented data analysis and corrective action. The seven QC tools are the practical toolkit these standards expect teams to use for monitoring and improvement.

    Build the data-analysis skills standards expect

    Shortage of Data-Driven Problem Solvers

    Many production teams still fix problems by intuition. Employers increasingly need staff who can collect data, build Pareto and control charts, and act on evidence rather than guesswork.

    Move from intuition to evidence

    Scaling Automotive and EV Quality

    New EV, battery and component plants raise the bar on process control. Quality engineers who can apply statistical process control and stratification are needed to hold tolerances at volume.

    Apply SPC at volume

    Food, Pharma and FMCG Compliance

    Food safety, good manufacturing practice and batch consistency require constant monitoring. Check sheets, histograms and control charts give teams a reliable way to track and defend quality.

    Track and defend batch quality

    Industry 4.0 Without Quality Basics

    Factories are adopting sensors and automation faster than quality fundamentals. The seven tools turn raw shop-floor data into decisions that actually improve processes.

    Turn shop-floor data into decisions

    Sources: Ministry of Industry, The Jakarta Post, Statista, World Bank (Indonesia manufacturing) 2025-2026.

    The seven QC tools are the most practical way to build quality problem-solving capability in your team. Join professionals across Indonesia who use them to cut defects and improve processes. Book your session today.

    Your Indonesia Quality Career Shift

    From Guesswork to Structured Problem-Solving

    What the Seven QC Tools Change

    Indonesia's manufacturers are investing heavily in quality and process control as output scales and export standards tighten. The teams that stand out are the ones that solve problems with data. Here is the shift the seven QC tools make.

    Today

    Problems get fixed by intuition and the same defects keep coming back

    After Training

    You run structured root cause analysis and stop defects at the source

    Today

    Quality decisions rely on opinion rather than data

    After Training

    You back quality decisions with Pareto, control charts and real process data

    Today

    Limited to firefighting on your own line

    After Training

    Ready for quality engineer, supervisor and improvement roles across Indonesian industry

    You master the seven tools

    Before

    No shared method for tackling quality problems in the team

    Now you have

    A common toolkit the whole team can use, from operators to engineers

    Before

    Quality tools feel statistical and hard to apply

    Now you have

    Hands-on confidence with all seven tools on real workplace examples

    Before

    Improvement work stalls without a clear starting point

    Now you have

    A clear workflow: check sheet to Pareto to fishbone to control chart

    Before

    Skills that do not transfer between employers or sectors

    Now you have

    Universally recognised tools used across manufacturing and services

    "The difference between teams that keep repeating defects and teams that eliminate them is a shared, practical set of quality tools."

    Join 50,000+ professionals who trained with Invensis Learning and put quality skills to work.

    Sources: Ministry of Industry, BPS, The Jakarta Post (Indonesia) 2025-2026.

    Module 1: Introduction to Quality Control Tools

    • Overview of the 7 QC Tools and their role in quality management and process improvement
    • Importance of data-driven decision-making in quality control and continuous improvement programs
    • Evolution of quality control tools and their integration with Lean, Six Sigma, and total quality management
    • How the seven tools work together to identify, analyse, and resolve quality problems in the workplace

    Module 2: Pareto Chart

    • Understanding Pareto analysis and the 80/20 principle in quality and defect management
    • Constructing a Pareto chart from raw defect and frequency data
    • Interpreting Pareto charts to prioritize quality improvement efforts and resource allocation
    • Applying Pareto analysis to manufacturing, service, and process improvement scenarios

    Module 3: Cause and Effect Diagram (Fishbone)

    • Creating cause and effect diagrams to identify root causes of quality problems
    • Categorizing causes across man, machine, method, material, measurement, and environment
    • Facilitating root cause analysis sessions using the fishbone diagram structure
    • Applying fishbone diagrams to defect investigation and corrective action planning

    Module 4: Check Sheet

    • Designing check sheets for structured and consistent data collection in quality environments
    • Selecting the appropriate check sheet type for defect recording, frequency analysis, and location mapping
    • Collecting quality data using check sheets in manufacturing, service, and process settings
    • Analysing check sheet data to identify patterns, trends, and improvement opportunities

    Module 5: Histogram

    • Constructing histograms from quality and process measurement data
    • Interpreting data distribution patterns including normal, skewed, bimodal, and out-of-control distributions
    • Using histograms to assess process capability and identify variation sources
    • Applying histogram analysis to production data, measurement systems, and service delivery metrics

    Module 6: Scatter Diagram

    • Plotting scatter diagrams to visualize the relationship between two process variables
    • Identifying positive, negative, and no-correlation patterns in quality and process data
    • Conducting trend analysis using scatter diagrams to support root cause investigation
    • Applying scatter diagram analysis to process optimization and variable relationship studies

    Module 7: Control Charts

    • Understanding control charts and their role in monitoring process stability over time
    • Constructing X-bar and R charts for variable data and interpreting control limits
    • Using p-charts and c-charts for attribute data including defect proportions and defect counts
    • Identifying out-of-control signals, trends, and special cause variation in control chart data
    • Applying control charts to production monitoring, quality audits, and process capability assessment

    Module 8: Flowchart

    • Creating process flow diagrams to map and visualize workflow sequences and decision points
    • Using standard flowchart symbols for processes, decisions, inputs, outputs, and connectors
    • Conducting workflow analysis to identify inefficiencies, bottlenecks, and improvement opportunities
    • Applying flowcharting to quality process documentation, procedure mapping, and improvement planning

    Module 9: Implementation Strategies and Case Studies

    • Planning the deployment of the 7 QC Tools within a quality improvement project or program
    • Selecting the right tool for each stage of a quality problem-solving process
    • Reviewing case studies from manufacturing, healthcare, IT, and services showing real-world 7 QC Tools application
    • Building an implementation roadmap for integrating the 7 QC Tools into ongoing quality management activities

    Course Curriculumof the 7 QC Tools Training

    The 7 QC Tools training curriculum in the Indonesia is structured across nine modules covering all seven core quality tools plus implementation strategies and real-world case studies. The program is designed to be practical, with each module aligned to real quality improvement responsibilities and workplace scenarios across manufacturing, healthcare, IT, and service sectors.

    • Overview of the 7 QC Tools and their role in quality management and process improvement
    • Importance of data-driven decision-making in quality control and continuous improvement programs
    • Evolution of quality control tools and their integration with Lean, Six Sigma, and total quality management
    • How the seven tools work together to identify, analyse, and resolve quality problems in the workplace

    These 7 simple tools quietly power quality control programs from car factories to hospital labs.

    image

    100% Secure and Safe download

    The Seven Quality Tools You Will MasterOne Practical Tool at a Time

    This training teaches all seven quality control tools in one practical programme, each with worked examples and hands-on exercises so you can apply them immediately. You will learn what each tool does, when to use it, and how the tools work together in a single quality investigation.

    Cause-And-Effect (Fishbone) Diagram

    Map the potential causes of a defect using the 6M framework (Man, Machine, Method, Material, Measurement, Environment), facilitate a team fishbone session, and drill down to true root causes rather than symptoms.

    Check Sheet Design and Data Collection

    Design check sheets that capture reliable defect, location and frequency data at the point of occurrence, so every analysis starts from clean, consistent and trustworthy information.

    Pareto Chart and the 80/20 Rule

    Rank problems by frequency or cost to separate the vital few from the trivial many, and focus improvement effort where it delivers the biggest reduction in defects.

    Control Charts and SPC

    Track a process over time, tell common-cause from special-cause variation, choose the right chart type, and know when to act and when to leave a stable process alone.

    Histograms and Distribution

    Build histograms to reveal the shape, spread and central tendency of process data, spot skew or bimodal patterns, and compare output against specification limits.

    Scatter Diagrams and Correlation

    Plot paired data to test whether a suspected cause really drives an outcome, read positive, negative and weak correlation, and avoid confusing correlation with causation.

    Stratification and Flow Charts

    Separate data by shift, machine, operator or line to expose hidden patterns, and map process flows to find non-value steps, rework loops and quality risk points.

    Choosing and Combining the Tools

    Learn a practical workflow that links the tools, from check sheet to Pareto to fishbone to control chart, so you select the right tool for each quality problem you face.

    Who Should Take7 QC Tools Training in Indonesia?

    Quality Control Professionals

    Manufacturing Specialists

    Process Improvement Experts

    Project Managers

    Data Analysts

    QA Specialists

    Team Leaders and Supervisors

    Lean Six Sigma Practitioners

    Who Can Take This Certification Training

    7 QC Tools Training Modesfor Professionals and Teams

    We offer flexible training formats designed to suit different learning preferences, schedules, and professional goals. Whether you prefer self-paced learning or a structured learning experience, choose the option that best supports your certification and skill development journey.

    7 QC Tools Live Virtual Training

    • Live online instructor-led sessions

    • Interactive discussions and virtual activities

    • Expert guidance from experienced trainers

    • Practice assessments and revision support

    • Dedicated Q&A sessions for concept clarification

    • Fixed schedules for accountability and momentum

    • Small batch sizes for personalized attention

    • Access from any location with internet connectivity

    USD 395

    Attend fully interactive virtual 7 QC Tools training sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences.

    Untitled

    Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

    Untitled

    7 QC Tools Classroom Training

    • Instructor-led classroom sessions

    • Interactive discussions and group activities

    • Real-world examples and practical exercises

    • Structured learning with fixed schedules

    • Opportunities for peer networking and collaboration

    • Practice assessments and knowledge checks

    • Dedicated Q&A and concept clarification

    • Immediate trainer feedback and support

    Untitled

    Learn through face-to-face sessions led by experienced instructors in a collaborative environment. This classroom 7 QC Tools training format combines expert guidance, peer interaction, and hands-on activities to create an engaging learning experience.

    Untitled

    Best For: Learners who prefer in-person interaction, structured schedules, and collaborative learning experiences.

    Untitled

    7 QC Tools Corporate Group Training

    • Customized training aligned to organizational goals

    • Flexible delivery: onsite, virtual, hybrid, or blended

    • Scheduling tailored to business availability

    • Role-based examples and industry-relevant discussions

    • Progress tracking and learner assessments where applicable

    • Dedicated coordination and administrative support

    • Consistent learning experiences across teams

    • Scalable delivery for local, regional, or global workforces

    Untitled

    Designed for organizations that want to build capabilities at scale, standardize knowledge, and support workforce development through Corporate 7 QC Tools training program.

    Untitled

    Best For: Organizations looking to upskill employees, address capability gaps, and deliver consistent training across teams.

    Untitled

    7 QC Tools Focused 1-to-1 Training

    • One-to-one instructor attention

    • Customized learning plans and objectives

    • Flexible scheduling based on availability

    • Personalized feedback and coaching

    • Additional focus on challenging topics

    • Targeted practice and revision support

    • Faster clarification of questions and concepts

    • Learning pace is adapted to individual needs

    Untitled

    Receive personalized instruction tailored to your goals, pace, and learning requirements through dedicated sessions delivered by 7 QC Tools training institute.

    Untitled

    Best For: Professionals seeking personalized guidance, accelerated learning, or focused support to achieve specific outcomes.

    Untitled

    7 QC Tools Live Virtual Training

    7 QC Tools Live Virtual Training

    Live online instructor-led sessions

    Interactive discussions and virtual activities

    Expert guidance from experienced trainers

    Practice assessments and revision support

    Dedicated Q&A sessions for concept clarification

    Fixed schedules for accountability and momentum

    Small batch sizes for personalized attention

    Access from any location with internet connectivity

    Starts from

    USD 395

    Please Note:Attend fully interactive virtual 7 QC Tools training sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences.

    Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

    Loading schedules…

    Why Train with Invensis Learning in IndonesiaYour Quality Training Partner

    As a leading 7 QC Tools training company in Indonesia, Invensis Learning is a global professional training provider trusted by teams across more than 100 countries, holding ISO 9001:2015 certification for quality management and ISO 27001:2022 for information security. Our 7 QC Tools training is led by experienced quality and process improvement practitioners who teach the tools through real, hands-on examples rather than theory. Whether you enrol as an individual or train a whole team, you get flexible delivery, structured courseware and practical exercises for every tool, plus learner support before, during and after the session.

    • Experienced trainers with real quality and process improvement backgrounds
    • Practical, exercise-led sessions covering all seven QC tools
    • Flexible delivery: live online, classroom and onsite for teams
    • ISO 9001:2015 and ISO 27001:2022 certified training organisation
    • Structured courseware, worked examples and downloadable resources
    • Corporate and group training tailored to your industry
    • Dedicated learner support before, during and after training
    • Trusted by professionals and organisations across 100+ countries

    12M+

    Hours of Training Delivered

    4

    Flexible Learning Modes

    98%

    First-Attempt Pass Rate

    5000+

    Accredited Trainers Globally

    ISO 9001:2015 Certified

    ISO 9001:2015 Certified

    ISO 27001:2022 Certified

    ISO 27001:2022 Certified

    Secure SSL Encryption

    Secure SSL Encryption

    Leaders in Training industry for 12+ years

    Leaders in Training industry for 12+ years

    Over 5000 five star reviews

    Over 5000 five star reviews

    Level AA conformance, W3C WCAG 2.2

    Level AA conformance, W3C WCAG 2.2

    7 QC Tools Training Locations in the IndonesiaAll our classroom training is now available online at your convenience

    7 QC Tools Training in Indonesia

    Hotel Indonesia Kempinski, Jalan Haji Mohammad Saleh Ishak, RW 05, Menteng, Jakarta Pusat, Daerah Khusus Ibukota Jakarta, Jawa, 10310, Indonesia

    7 QC Tools Training in Indonesia

    Grand Hyatt Jakarta, Jalan Haji Mohammad Saleh Ishak, RW 05, Gondangdia, Menteng, Jakarta Pusat, Daerah Khusus Ibukota Jakarta, Jawa, 10350, Indonesia

    corporate banner

    Corporate 7 QC Tools TrainingUpskill Your Quality Function

    Untitled

    • Train whole quality, production and engineering teams together
    • Onsite, live virtual or hybrid delivery around your shift patterns
    • Real examples from your own products, defects and processes
    • Build a shared quality problem-solving language across the plant
    • Flexible scheduling for single sites or multi-plant operations
    • Experienced trainers with manufacturing and quality expertise
    • Progress tracking and post-training support for your teams

    Trusted by Leading Organisations

    Astra InternationalToyotaUnilever IndonesiaKalbe FarmaIndofoodDenso Indonesia

    What Our Learners Say

    Untitled

    From Opinions to Evidence on the Line

    "The fishbone and Pareto sessions changed how our line handles defects. Instead of arguing about causes, we now collect data and let it point us to the real problem. I applied a control chart to a plating process the week after training and caught a drift early."

    Budi Santoso

    Quality Engineer, Automotive Components

    Untitled

    0/0

    Practical Tools I Could Use Straight Away

    "Very practical and easy to follow, even without a statistics background. The check sheet and histogram exercises were exactly what my food quality team needed. We redesigned our defect check sheet the same week and our data is far cleaner now."

    Siti Rahmawati

    QC Supervisor, Food and Beverage

    Untitled

    0/0

    Stratification Revealed a Hidden Pattern

    "The scatter diagram and stratification parts were an eye opener. Splitting our defect data by shift revealed a pattern we had missed for months. The trainer used real examples that felt close to our electronics assembly work."

    Andi Wijaya

    Process Improvement Analyst, Electronics

    Untitled

    0/0

    A Shared Toolkit Across Two Plants

    "We ran this as onsite training for two plants and it gave our teams a shared quality language. Operators and engineers now use the same seven tools in the same order, which has made our corrective action reviews much sharper and faster."

    Rina Kusuma

    Quality Manager, Automotive Manufacturing

    Untitled

    0/0

    Flexible Delivery That Fit Our Shifts

    "As an L&D lead I needed training that would land with busy production staff. Invensis delivered flexible sessions that fit our shifts, and the hands-on exercises meant people left able to apply the tools. It has become part of our continuous improvement programme."

    Hendra Pratama

    Learning and Development Lead, Pharmaceuticals

    Untitled

    0/0



    Trustpilot

    4.6

    Ratings

    100K+

    Happy Learners

    100+

    Locations Worldwide

    99%

    Training Satisfaction

    Enquire with us now

    Drop us a query and our learning consultant will reach out to you shortly

    Get Course Details & Pricing

    Fill out this form and we will respond quickly.

    We also deliver 7 QC Tools Trainingacross multiple cities

    Invensis Learning delivers industry-leading 7 QC Tools Training training solutions tailored for individuals and organizations.

    Jakarta
    City map with location markers

    Explore Our Other Course Categories

    Agile

    Project Management

    ITSM

    Quality Management

    DevOps

    IT Governance

    Other Related Courses

    Foundation

    Poka Yoke

    Foundation

    Lean Six Sigma Yellow Belt

    Foundation

    Business Process Management

    Foundation

    Six Sigma Awareness

    Foundation

    7 QC Tools Training

    Advanced

    Lean Six Sigma Black Belt

    Foundation

    Quality Function Deployment

    Foundation

    Lean IT

    Advanced

    Lean Six Sigma Green Belt

    Foundation

    Minitab Essentials

    Foundation

    Design for Six Sigma

    Foundation

    Lean Fundamentals

    Foundation

    Quality by Design

    Foundation

    Lean Manufacturing

    Foundation

    Value Stream Mapping

    Foundation

    Kaizen

    Foundation

    Root Cause Analysis

    Frequently Asked QuestionsHere's everything you may ask...

    The 7 QC Tools training is a practical, one-day skills course covering the seven core quality control tools used for defect analysis, root cause investigation and process improvement. It suits quality engineers, production supervisors, process improvement practitioners and anyone working in a quality environment, with no prior experience required.

    General

    What is the 7 QC Tools training and who is it for?

    The 7 QC Tools training is a practical, one-day skills course covering the seven core quality control tools used for defect analysis, root cause investigation and process improvement. It suits quality engineers, production supervisors, process improvement practitioners and anyone working in a quality environment, with no prior experience required.

    What are the seven QC tools covered in this course?

    The seven tools are the cause-and-effect (fishbone) diagram, check sheet, control chart, histogram, Pareto chart, scatter diagram, and stratification or flow chart. Each is taught with concept explanation, worked examples and hands-on practice so you can apply it at work.

    Is the 7 QC Tools training worth it for my career?

    Yes. The seven quality control tools are everyday skills for quality and process improvement roles across Indonesian manufacturing, from QC Inspector and Quality Engineer to QC Supervisor and Quality Assurance Manager. Employers value people who can find and fix quality problems with data.

    How long is the 7 QC Tools training?

    The training runs for one day (8 hours) and covers all seven quality control tools. Each tool is taught with concept explanation, worked examples and hands-on exercises, so you leave able to use them immediately.

    Are the seven QC tools relevant to ISO 9001 and Six Sigma?

    Yes. The seven tools are the practical toolkit behind ISO 9001 data analysis and improvement, and they are used directly in the Measure and Analyse phases of Six Sigma DMAIC and in Lean and TQM work. They are a strong foundation for further quality training.

    Which industries in Indonesia use the seven QC tools?

    They are used across automotive, electronics, food and beverage, FMCG, pharmaceuticals, textiles and chemicals. Any team that collects quality data and wants to reduce defects and control processes benefits from the tools, which is why demand spans Indonesia's manufacturing base.

    Pricing

    How much does the 7 QC Tools training cost in Indonesia?

    Fees depend on the delivery format (live online, classroom or onsite) and group size, so pricing is available on request. Contact a learning advisor for a quote tailored to individual or team enrolment.

    What is included in the course fee?

    The fee typically includes instructor-led training on all seven tools, structured courseware, worked examples and hands-on exercises, downloadable resources, learner support, and a course completion certificate from Invensis Learning.

    Do you offer group or corporate discounts?

    Yes. We offer corporate and group training with customised schedules and volume-based pricing for quality, production and engineering teams. Ask about corporate pricing for your organisation in Indonesia.

    What payment methods are available?

    We accept major credit and debit cards and bank transfers, with instalment options on selected plans. Speak with a learning advisor to choose the option that suits you.

    Is there a discount for team enrolments?

    Yes. Enrolling several people together usually qualifies for group pricing, and onsite delivery for a whole team is often the most cost-effective option. Request a group quote for a tailored figure.

    Assessment

    How is learning assessed in the 7 QC Tools course?

    The course is practical and hands-on rather than test-based. You apply each of the seven tools to worked examples and realistic quality scenarios during the session, and group activities reinforce your understanding as you go.

    What do I receive after completing the training?

    You receive a course completion certificate from Invensis Learning, along with practical skills in all seven quality control tools that you can apply to real defects, processes and improvement projects straight away.

    Do I need a statistics background to take this course?

    No. The seven tools were designed by Kaoru Ishikawa to be accessible to everyone, regardless of statistical background. The training covers each tool from first principles with plenty of hands-on practice.

    Is any prior quality experience required?

    None is required. Some familiarity with quality concepts is helpful but not essential. The course is intentionally practical and approachable, and it is open to anyone working in or moving into a quality or process improvement role.

    Can I apply the tools at work straight away?

    Yes. Because every tool is taught through worked examples and hands-on exercises, you leave able to use the fishbone diagram, Pareto chart, control chart and the rest on your own processes immediately after the training.

    Course Content

    What will I learn in the 7 QC Tools training?

    You will learn to apply all seven quality control tools: the fishbone diagram for root cause analysis, check sheets for data collection, Pareto charts for prioritisation, control charts for process monitoring, histograms for distribution, scatter diagrams for correlation, and stratification or flow charts.

    Does the course include hands-on practice?

    Yes. Every tool is taught with concept explanation followed by worked examples and hands-on exercises on realistic quality scenarios, so you build practical confidence rather than just theory.

    Is stratification or the flow chart taught as the seventh tool?

    Both variants exist in quality practice, and the training covers stratification as a data-analysis technique alongside the flow chart for mapping process flows, so you understand how each supports the other six tools.

    What materials and resources are provided?

    You receive structured courseware, worked examples, practice exercises for each tool and downloadable reference resources. These help you revise the tools and apply them to your own processes after the session.

    Is the course suitable for a cross-functional team?

    Yes. Many organisations send cross-functional teams so quality problem-solving becomes a shared language across quality, production, engineering and operations. Onsite and group delivery are ideal for this. Ask about team training.

    Enrollment

    How do I enrol in the 7 QC Tools training?

    You can enrol through the Invensis Learning website. Choose your preferred format, complete the booking, and you will receive access to schedules, courseware and learning resources. Talk to a learning advisor if you need help choosing.

    What training formats are available?

    The course is available online (live virtual) instructor-led, in classroom sessions, and as onsite corporate training for teams. Choose the format that fits your schedule and learning preference.

    How soon can I start?

    Public sessions run regularly in live virtual and classroom formats, and corporate onsite training can be scheduled around your team's availability. See upcoming schedules or ask an advisor for the next available dates.

    Can I reschedule or transfer my booking?

    Yes. Flexi options let you reschedule or transfer to another session on selected plans. Contact support to arrange this before your scheduled date.

    Can the training be delivered onsite for my company in Indonesia?

    Yes. We deliver onsite and live virtual corporate training for teams across Indonesia, tailored to your products and processes. Request a group quote to arrange a session for your organisation.